Audio-Technica Artist Series Drum Kit 7-Piece Bundle

Description

Audio-Technica Artist Series Drum Bundle (7-Piece)
Brand New in its Original Retail Box
Thecamerabox
Authorized Dealer - Mfr # TM-DRUM7 / UPC 042005197064
Product Highlights:
Includes ATM250
Dynamic Hypercardioid Instrument Mic
Handles High SPL, Suitable for Kick
Includes ATM650
Dynamic Hypercardioid Instrument Mic
Includes 3 ATM230s Dynamic Mics for Toms
Includes 2 ATM450s
80 Hz HPF Switch
152 dB SPL
Includes Carrying Case and Accessories
Here is what you get:
Bundle Items
ATM250 Dynamic Hypercardioid Instrument Microphone
8471 Isolation Clamp
5/8"-27 to 3/8"-16 Threaded Adapter
Soft Protective Pouch
Limited 2-Year Warranty
ATM650 Dynamic Hypercardioid Instrument Microphone
AT8470 Quiet-Flex Mic Clamp
5/8"-27 to 3/8"-16 Threaded Adapter
Soft Protective Pouch
Limited 2-Year Warranty
2 x ATM450 Cardioid Condenser Instrument Microphone
8471 Isolation Clamp
5/8"-27 to 3/8"-16 Threaded Adapter
Windscreen
Soft Protective Pouch
Limited 2-Year Warranty
3 x ATM230 Hypercardioid Dynamic Instrument Microphone
Drum Microphone Clamp
Soft Protective Pouch
Limited 2-Year Warranty
Carrying Case with Accessories
This
Audio-Technica Artist Series Drum Microphone Set
provides seven microphones suitable for the recording of drums. For your kick, use the ATM250, a dynamic, hypercardioid mic with low-end emphasis that flatters bass drums.
Use the three ATM230 hypercardioid microphones to mic your tom drums. The two ATM450 microphones, with their high-pass filter switch at 80 Hz, are cardioid condenser microphones and can work as your overheads. A carrying case is included, as are mounting accessories.
The
Audio-Technica ATM250
is a dynamic microphone with a hypercardioid pick up pattern. The sensitivity is custom tailored to withstand high-sound pressure, ideal for capturing kick drum, brass, percussion, bass cabinets and other high-sound pressure sources. The neodymium magnet and output stage results in high gain and very low noise floor. The hypercardioid polar pattern delivers maximum off-axis signal and feedback rejection. The ATM250 includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise.
The
Audio-Technica ATM650
is a hypercardioid dynamic microphone designed for vocal or general instrument pickup. The rugged design of the ATM650 allows for a long term performance under the most adverse conditions. The ATM650 features a hypercardioid polar pattern for optimum rejection of off-axis noise and feedback. The wide frequency response is tailored for smooth, natural sound reproduction. The ATM650 is a workhorse solution for stage performances.
The
ATM450 Cardioid Condenser Instrument Microphone
from
Audio-Technica
is designed with a side-address capsule, allowing for easy placement and flexible positioning on percussion, guitar cabinets, piano, and similar applications. The cardioid polar pattern is effective in reducing off-axis noise and feedback, and the wide frequency response results in rich, natural detail. There is a low frequency roll-off switch for reducing low frequency ambiance and noise and a -10 dB Pad switch for providing additional headroom and minimizing noise caused by transient peaks. The package includes an isolation clamp, an adapter, a windscreen, and a soft protective pouch.
The
Audio-Technica ATM230
is a hypercardioid dynamic instrument microphone made for capturing drums and percussion. The mic's proprietary capsule is designed to excel in high-SPL applications, delivering full, well-rounded audio with accurate low-end reproduction.
The hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. It also sports a low-profile design which allows for a wide variety of placements. The ATM230 is ideally suited for miking toms, snares, and other percussion instruments.
ATM250 Dynamic Hypercardioid Instrument Microphone
Transducer
Dynamic
Polar Pattern
Hypercardioid
Frequency Response
40 Hz to 15 kHz
Dynamic Range (Typical)
Not specified by manufacturer
Signal-to-Noise Ratio
Not specified by manufacturer
Maximum Input Sound Level
Not specified by manufacturer
Power Requirements
Dynamic Element, No Power Required
Output Impedance
600 Ohms
Output Connectors
3-pin XLR
Pad
No
Low Frequency Roll-Off
No
Dimensions
5.02 x 2.17" / 127.5 x 55 mm (Length x Diameter)
Weight
8.9 oz / 252 g
Packaging Info
Box Dimensions (LxWxH)
9.6 x 5.2 x 3.1"
ATM650 Dynamic Hypercardioid Instrument Microphone
Transducer
Dynamic
Polar Pattern
Hypercardioid
Frequency Response
80 Hz to 17 kHz
Dynamic Range (Typical)
Not specified by manufacturer
Signal-to-Noise Ratio
Not specified by manufacturer
Maximum Input Sound Level
Not specified by manufacturer
Power Requirements
Dynamic Element
phantom power not required
Output Impedance
300 Ohms
Output Connectors
Integral 3-pin XLRM-type
Pad
No
Low Frequency Roll-Off
No
Dimensions
6.46 x 1.53" / 164 x 38.8 mm (Length x Diameter)
Weight
9.8 oz / 279 g
Packaging Info
Box Dimensions (LxWxH)
9.6 x 5.2 x 2.8"
ATM450 Cardioid Condenser Instrument Microphone
Analog Performance
Transducer
Condenser
Polar Pattern
Cardioid
Frequency Range
40 Hz to 20 kHz
Signal to Noise Ratio
69 dB
Maximum SPL
152 dB SPL
Pad
-10 dB
THD
1%
Impedance
200 Ohms
Sensitivity
-41 dB
Low-Cut Filter
18 dB/Octave @ 80 Hz
Dynamic Range
127 dB
General
Output Connectors
1 x
3-Pin XLR
Operating Current Consumption
3.5 mA
Operating Voltage
11 to 52 V
Length
5.00" / 126.9 mm
Diameter
0.83" / 21 mm
Weight
3.46 oz / 98 g
Packaging Info
Box Dimensions (LxWxH)
9.5 x 5.1 x 2.8"
ATM230 Hypercardioid Dynamic Instrument Microphone
Analog Performance
Sound Field
Mono
Transducer
Dynamic
Polar Pattern
Hypercardioid
Frequency Range
30 Hz to 12 kHz
Impedance
600 Ohms
Sensitivity
54 dBV/Pa
Low-Cut Filter
None
General
Output Connectors
1 x
3-Pin XLR
Length
3.25" / 82.5 mm
Diameter
1.5" / 38.10 mm
Weight
10.3 oz / 292 g
Packaging Info
Box Dimensions (LxWxH)
9.65 x 5.12 x 2.76"
For International Shipping Cost: Please click on 'Shipping and Payments' tab on the top of the page.
Sales Policy and Information
We offer Paypal, which is a fast and secure way of paying.
When paying with PayPal you may ship to whichever address you prefer.
We offer both Paypal and credit card payments.
Shipping Information
Most orders are shipped within 24 hours.
Standard shipping within the USA is shipped via UPS Ground, which is a secure and fast way of shipping.
We know you're anxious to get your purchase. Therefore, we offer UPS 3 Day Select and UPS Next Day Air Saver for a special low rate.
Orders shipped to PO Box addresses are shipped via USPS.
Orders shipped internationally will ship via USPS.
Attention Canadian and International Buyers:
Orders shipped internationally are shipped via USPS. UPS is available upon request.
We accept PayPal Payments from most international countries (wherever PayPal is accepted.)
On orders shipped outside the USA there may be local customs charges. Buyers will be responsible for any and all custom fees and charges. Please check with your local authorities prior to purchase.
As per USA Regulations we have to declare the full item amount when shipping overseas.