Hollyland LARK 150 Compact Digital Wireless Dual Lavalier Microphone System

Description

Hollyland LARK 150 2-Person Compact Digital Wireless Microphone System (2.4 GHz, Black)
Comes with original package.
Tested in working condition.
Key Features
For 2-Person YouTube & Content Creation
2 Clip-On Transmitter/Mics, 1 Receiver
2 Lavalier Microphones + Windscreens
Receiver Clips to Camera Shoe Mount
Case Pairs Units and Recharges Batteries
3.5mm Audio Out + 3.5mm Headphone Out
Easy Plug & Play Operation, Encryption
Safe/Mono/Stereo Modes, 2-Way Mute
4-Hr Transmitter & 7.5-Hr Receiver Power
Expandable up to 8 Mics / 328' Range
Hollyland HL-LARK 150 Specs
System
Wireless Transmission
Digital 2.4 GHz
Included Transmitters
2 x
Clip-On
Diversity
Frequency
RF Bandwidth
2.4 GHz
RF Channel Scanning
Auto-Scan
Max Operating Range
328.1' / 100 m (Line of Sight)
Max Systems per Setup
8
Built-In Recorder
No
Timecode
None
Latency
<5 ms
Dynamic Range
100 dBA
Encryption
128-Bit
Receiver
Form Factor
Beltpack / Portable
Mounting Options
Belt Clip, Shoe-Mount (with Included Hardware)
Number of Audio Channels
2
Audio I/O
1 x
1/8" / 3.5 mm TRS Female Unbalanced Line Output
1 x
1/8" / 3.5 mm TRS Female Unbalanced Headphone Output
Gain Range
+45 dB
Audio Output Level
1/8" / 3.5 mm Output:
45 dB
Phantom Power Protection
None
Frequency Response
20 Hz to 20 kHz
Network I/O
None
Word Clock I/O
None
USB/Lightning Connectivity
1 x
USB Type-C (Charging)
Power Requirements
Battery
Battery Type
1 x
Built-In Rechargeable (Included)
Internal Battery Capacity
530 mAh
Battery Charging Time
1.5 Hours
Approx. Battery Life
7.5 Hours (Lithium)
Display & Indicators
1 x
OLED (AF Level, Battery Status, Level, Metering, Multifunction, Mute, Output Level, RF Level, Transmitter Battery Status)
Dimensions
26.4 x 16.1 x 8.1" / 67 x 41 x 20.5 cm
Weight
1.8 oz / 51 g
Transmitter
Form Factor
Clip-On with Microphone
RF Output Power
1 mW
Audio I/O
1 x
1/8" / 3.5 mm TRS Female Input
Included Cable Connector
1/8" / 3.5 mm TRS
Pad
None
Muting
Off/On Switch
Audio Input Level
-65 dBV
Auto-Level Control
No
Signal Processing
None
Frequency Response
20 Hz to 20 kHz
Sync Method
Proprietary
Power Requirements
Battery
Battery Type
1 x
Built-In Rechargeable (Included)
Internal Battery Capacity
200 mAh
Battery Charging Time
1.2 Hours
Approx. Battery Life
4.5 Hours
USB/Lightning Connectivity
1 x
USB Type-C (Bus Power, Charging)
Display & Indicators
1 x
LED (Battery Status, Power)
1 x
LED (Mute, Sync)
Dimensions
1.5 x 1.5 x 0.7" / 3.7 x 3.7 x 1.7 cm
Weight
0.7 oz / 20.5 g
Microphone
Form Factor
Integrated
Sound Field
Mono
Capsule
Electret Condenser
Polar Pattern
Omnidirectional
Frequency Range
20 Hz to 20 kHz
Maximum SPL
Omnidirectional: 100 dB SPL
Dynamic Range
100 dB A-Weighted
Microphone 2
Form Factor
Lavalier
Color
Black
Sound Field
Mono
Operating Principle
Pressure Operated
Capsule
Electret Condenser
Polar Pattern
Omnidirectional
Frequency Range
20 Hz to 20 kHz
Maximum SPL
100 dB SPL
Sensitivity
-42 dB
Dynamic Range
100 dB A-Weighted
Output Connectors
1 x
1/8" / 3.5 mm 3-Pin Male
Packaging Info
Package Weight
1.45 lb
Box Dimensions (LxWxH)
7 x 5.2 x 2.7"
Advantages of Hollyland Lark 150
Hollyland Lark150 is a compact 2.4GHz dual channel wireless lavalier microphone system with 2 transmitters/TXs, 1 receiver/RX, and a portable charging case. Its TXs are as lightweight as 0.72oz/20.5g, and as small as a coin (L*W*H=1.45*1.45*0.69 inch). The talents can barely feel the existence of it. With less than 5ms latency and up to 100m optical range, you don't have to worry about voice and video sync, or shooting distance.
Portable Charging Case with Auto Pairing, Auto Charging Function
The charging case can charge the whole kit up to 2.5 times. It takes only 1.5h to recharge RX and TXs. After fully charged, TX can be used up to 4 hours and RX up to 7 hours. If you use one TX at a time, the whole system can work for 18 hours with the charging case. When taken out of the case, they are automatically turned on. When put inside, they are automatically paired and will start to charge if needed. Ready to use at anytime, anywhere.
Small and Light
The coin-sized mic weighs only 0.72oz/20.5g, as lightweight as a walnut. With built-in belt clip on TX and RX, the microphones can easily clip on any collar/lapel without pulling down your shirt, and the receiver can hold on to camera’s mount stably. The Lark 150 omnidirectional microphone also comes with 2 pairs of lavalier mics and furry wind-muffs. The wind-muffs are perfect to use in windy environment. You can choose different installation and audio input methods as you like.
Anti-vibration and Intelligent Noise Cancellation
You can still have stable voice recording when talents are moving around with the Hollyland anti-vibration function. And you don't have to worry too much about ambient noise since Lark 150 has intelligent Noise Cancellation function. It can filter out low-frequency environmental noise, making the sound pure and more relevant. This feature is very useful when shooting sports activities like yoga, working out, running, dancing and so on.
Two-way Mute Buttons & Real Time Monitoring
You can mute the mic from both the transmitters and receivers. It's easier to control what is being recorded. With real time monitoring function and OLED display, you can plug in your earphone on the receiver or your camera to listen, and do some adjustments timely. Lark 150 microphone system has 3 working modes; mono for one-person voice picking, stereo for 2 persons, and safety track mode to prevent pops (Right track is -6dB lower than the left one).
Fast Auto-pairing, Upgrade, Storage for the Whole System
The charging case is not only a power solution, you can get the kit paired, carry everything inside, and even upgrade the system by connecting the charging case to your computer using USB-C cable. The whole kit is automatically paired, and charged once put into the charging case. The OLED screen on the receiver shows the battery level of TX and RX. And the indicator lights help you understand their status.
Wide Compatibility and Using Scenario
The Lark 150 system is compatible with your audio recorder, DSLR cameras (Sony, Canon, etc.), camcorder, iPhone/iPad/Android smartphone, laptops, computer, etc. You can connect the receiver to your device using our TRS to TRS or TRS to TRRS cable that come with the package. It's perfect for voice recording scenario like YouTube, commercial, v-logging, interview, podcast, film making, church shooting and live streaming and so on. If you have any questions during use, please feel free to message us.
Product Parameters
Interfaces
TX: 3.5mm Audio Input Port Charging/Upgrading Contacts RX: 3.5 mm TRS Output Interface 3.5mm Headset Interface Charging/Upgrading Contacts Charging Case: USB Type-C Interface
Frequency Bandwidth
2.4GHz AFH
Built-In Mic
Polar Pattern: Omnidirectional Frequency Response: 20Hz~20KHz
Lavalier Mic
Polar Pattern: Omnidirectional Frequency Response: 20Hz~20KHz
Reference Audio Input Level
-65 dBV
Maximum Input Sound Pressure
100dB SPL (1KHz@1m)
Dynamic Range
100 dBA
Polar Pattern
Omnidirectional
Audio Output Change Range
21-State: 45dB
Transmission Latency
5ms
Battery Mode
TX: 200mAh (0.76Wh) RX: 530mAh (1.96Wh) Charging Case: 3350mAh (12.16Wh)
Battery Life
TX: 4.5h RX: 7.5h Charging Case: About 2.5 times (Charge 2 TX and 1 RX at the Same Time in Full Charged States)
Charging Time
TX: 1.5h RX: 2h Charging Case: 2.5h
Firmware Upgrade Method
PC
Dimensions
TX: (L*W*H) 37*37*17.5mm RX: (L*W*H) 67*41*20.5mm Charging Case: (L*W*H) 121*61*43.5mm
Weight
TX: 20.5g RX: 51g Charging Case: 227.5g